Geberit

Showing 1-15 of 27 results

per page
Set Descending Direction
  1. Geberit 3/8 inch Bottom Inlet Valve ATS5027

    CAUTION!! THIS IS A 3/8 INCH BSP THREAD WHICH IS QUITE UNUSUAL IN AUSTRALIA

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  2. Geberit  Dual Flush Button Plate for UP170 Concealed Cistern ATS5029

    This button plate is a genuine Geberit product for the UP170 concealed tank. This dual flush plate is manufactured to Geberit's usual high standards.

    For related products, see below.

  3. Geberit Back Plate For UP170 Cistern Button Plate ATS5030

    Backing plate for Geberit button plate for UP170 tank

  4. Geberit Diaphragm Product Code ATS559

    Geberit Diaphragm, Our Product Code ATS 559. Suits the 360 bottom or 380 side inlet fill valves. 

    The code  Geberit  814 288/R17  /50/2/LSR is embossed on the diaphragm

    Some of these diaphragms have different numbers stamped on from different batches. They are usually the same.

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by email info@toiletspares.com.au, phone or text (0415 614 847).

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

  5. Geberit Twico 2 Impuls 280 Dual Flush Valve Product Code ATS069

    The Geberit Twico 2 dual flush valve is found in several toilet suites in Australia including Caroma and Villeroy and Boch. 

    For installation and instruction videos click on the two videos below :

    Setup And Adjustment Video

    Installation Video

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  6. Geberit 360 Bottom Entry Inlet Valve Half Inch BSP Product Code ATS066

    The Geberit 360 Quiet Flow inlet valve is a high quality inlet valve which will fit most Australian bottom entry cisterns. Commonly found in other cisterns such as Caroma or Fowler

    FOR FITTING AND ADJUSTMENT, PLEASE WATCH OUR VIDEO HERE:

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

  7. NEW
    Geberit 380 Side Entry Inlet Valve Product Code ATS067

    Geberit 380 Side Entry Inlet Valve Product Code ATS 067.

    FOR UP270 CONCEALED CISTERNS YOU MAY NEED THE VERSION WITH SIDE PLATES ON:

    SEE THIS VALVE HERE.

    Geberit Impuls 380 is a 3/8" European size side entry float valve. This valve is fitted in many imported  concealed cisterns and close coupled suites like Duravit, Laufen and some Villeroy and Boch.

    It can be connected to a 1/2" valve, contact us for details of how to do this.

    The pressure range in which the filling valve operates is 10-1000 kPa (0.1 to 10 bar). All parts
    exposed to pressure are made entirely from PBT which is a chlorine and acid resistant material.

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

  8. Twico 1 Flush Valve Main Body Only Product Code ATS275

    The Well Proven Twico 1 Flush Valve Product Code ATS 275 is common to many Australian toilet cisterns. Button and other parts sold seperately. This body only, which clips straight on to an existing twico basket. This allows for replacement without removing the cistern.

    For the complete Twico 1 valve, see Product Code ATS068.

    Remember, when replacing the flush valve, it is a good idea to also replace the inlet valve. These items have a similar lifespan and you don't want to be doing this job twice. Have a look at our inlet valves, they are probably much cheaper than you expect. (scroll down or look under “Inlet Valves” on the blue ribbon above) 

    Also, for adjustment of your valve, have a look at our page explaining how they work. This will give a good idea of how to adjust them. Start with the single flush valves and then read about the dual flush valves.

    The explanation is here:

    https://toiletspares.com.au/refunds-policy/frequently-asked-questions

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

  9. Geberit Replacement Outlet Valve Dual Flush Seal Product Code ATS070

    Genuine Geberit replacement flush seal for Twico 1 and 2 flush valves (impuls260 and 280) .

    Dimensions are as follows:

    Inside diameter 31mm

    Outside diameter 62mm

    Thickness 2.75mm

    These Geberit flush valves are used in many other Australian toilets including:

    Argent, Brodware, Catalano, Cotto, Duravit, Gemini, Ideal Standard,

    Kohler, Laufen, Parisi, Pozzi-Ginori, R.A.K., Sangara, Stylus, Toto,

    Villeroy & Boch and Vitra,

    Our product Code: ATS 070

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

  10. Geberit Twico 1 Button Product Code ATS219

    This button fits the Geberit Twico 1 flush valve which is used in many Australian toilets including Caroma, Kohler and Villeroy and Boch.

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  11. Geberit Twico 2 Button Product Code ATS064

    The genuine Geberit Twico 2 button product code ATS064 to go with the Twico 2 Geberit flush valve. 

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  12. Geberit Twico 1 Dual Flush Toilet Valve Complete with Button Etc. Product Code ATS068

    This is the entire Geberit Twico 1 Impuls 250 valve with all ancilliaries including buttons, bridge and push rods.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  13. Geberit Impuls 250 Twico 1 flush valve Bridge only Product Code ATS207

    Bridge for the Geberit Twico 1 flush valve. This valve is common in many types of Australian and New Zealand toilet. It has the distinctive half moon buttons. Commonly damaged from incorrect removal of buttons, the correct method of  which are not obvious (see here for proper instructions of how to remove the Geberit Twico 1 Button:

    https://w ww.youtube.com/watch?v=7UDzaBsi0MU)

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  14. Geberit Overflow Inlet Valve Clip Product Code ATS1138

    This clip fits inside the overflow of the Geberit Twico 2 flush valve and supports the Geberit 380 side inlet valve. 

    Our Product code ATS1138

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

Showing 1-15 of 27 results

per page
Set Descending Direction
Articles