Inlet Valves

Showing 16-20 of 20 results

per page
Set Descending Direction
  1. Geberit side inlet valve with short flexihose ending in a 1/2 inch female fitting. ATS067-4

    Geberit side inlet valve with flexihose ending in a 1/2" female fitting. Suitable for bottom entry cisterns. 

    Note, hose is approx 230mm long

    Geberit Impuls 380 is a  European side entry float valve. This valve is fitted in many imported  concealed cisterns and close coupled suites like Duravit, Laufen and some Villeroy and Boch.

    The pressure range in which the filling valve operates is 10-1000 kPa (0.1 to 10 bar). All parts

    exposed to pressure are made entirely from PBT which is a chlorine and acid resistant material.

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  2. Geberit 380 Side Inlet Valve with 480mm long Flexihose ATS067-5

    Geberit side inlet valve with 480mm long flexihose ending in a 1/2" male nipple. Suitable for bottom entry cisterns.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  3. Grohe Side Inlet Valve 1/2 inch Product Code ATS215

    Grohe Side Entry 1/2" Float (inlet or fill) Valve with Plastic Thread.

    These valves also come with a brass 3/8" tail.  Please ensure you select the correct product.  The 1/2" version will measure around 20mm across the thread and the 3/8" will measure around17mm.

    The 3/8" version can be found HERE

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  4. Sanindusa Inlet Valve Repair Kit ATS904

    Sanindusa Inlet Valve upgrade diaphragm kit. This kit is an upgrade kit for the original tall white inlet valves and will only fit the older type white inlet valves.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  5. -100%
    Geberit 380 Side Entry Inlet Valve Product Code ATS067-A

    Geberit 380 Side Entry Inlet Valve Product Code ATS 067-A.

    THIS IS THE EXPENSIVE VERSION FOR UP270 CONCEALED CISTERNS WHICH HAS SIDE PLATES ON.

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

Showing 16-20 of 20 results

per page
Set Descending Direction
Articles