Other Spares

15 Items results

per page
Set Descending Direction
  1. Out of stock
    Geberit concealed parts - Special order ATS1

    115.888.46.1 Twinline D/F push plate Matt Chrome, $98.40 each + GST

    240.511.00.1 Transmission block for UP 170, $28.45 each + GST

    240.512.00.1 Inner cover UP 170, $23.36 each + GST

    Attention, we will have to order this set and it will take at least a week to get to us. We will then ship it to you immediately but it will take longer than stock item

  2. Geberit Impuls 250 Twico 1 flush valve Bridge only Product Code ATS207

    Bridge for the Geberit Twico 1 flush valve. This valve is common in many types of Australian and New Zealand toilet. It has the distinctive half moon buttons. Commonly damaged from incorrect removal of buttons, the correct method of  which are not obvious (see here for proper instructions of how to remove the Geberit Twico 1 Button:

    https://w ww.youtube.com/watch?v=7UDzaBsi0MU)

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  3. Geberit Overflow Inlet Valve Clip Product Code ATS1138

    This clip fits inside the overflow of the Geberit Twico 2 flush valve and supports the Geberit 380 side inlet valve. 

    Our Product code ATS1138

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  4. 2 inch Standard Foam Donut washer Product Code ATS092

    Standard close coupled 2" foam replacement washer. Measurements: ID is 70mm, OD is 110mm, thickness is around 15mm.  Fitted in many close coupled toilets, ie where the porcelain cistern sits on the back of the toilet pan.  This doughnut washer fits between the cistern and the pan to prevent external leaks. Recommended every time the cistern is removed from the pan.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  5. 1-1/2 Inch Standard Foam Washer Product Code ATS091

    1.5" standard close coupled foam replacement washer.  Fitted in many close coupled toilets, where the porcelain cistern sits on the back of the toilet pan.  This doughnut washer fits between the cistern and the pan to prevent external leaks. Measurements: ID is 57mm and OD is 90mm, thickness is around 14mm.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  6. Cistern to Pan Bolt ATS098

    Individual cistern to pan bolts. Approximately 7.5mm in diameter. Please note, this is not a metric thread. Plated in cadmium and with high quality rubber washers, this product will give years of maintanence free service. 

  7. Grohe Clear Bellows for valve actuation ATS085

    Grohe Clear Bellows for valve actuation.

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  8. Grohe replacement black nipple with brass insert ATS330

    Grohe replacement black nipple with brass insert. 

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  9. Out of stock
    Flush Pipe Between Cistern and Pan ATS5020

    PVC Flush pipe to go between the Cistern and the Toilet Pan. Contains rubber sleeve for the toilet end and PVC collar and seals for the Cistern end. Designed to screw onto the underside of the flush valve where it pokes out of the cistern.

    The pipe is 50mm Outside Diameter and 46mm Inside Diameter.

    It is approximately 170mm from center to one end and approximately 240mm from the center to the other end. It is designed to be cut down to size. We recommend that you measure twice and cut once. Consider using your old pipe as a guide if it is the correct size.

  10. Out of stock
    Pan Cone 38mm ATS5021

    38mm Pan Cone Washer in White. Also available in black if required. Just let us know when you order. Email us on info@toiletspares.com.au

  11. Valsir Evolute replacement pneumatic bellows ATS447

    SINGLE Valsir Evolute replacement pneumatic bellows. Replacement bellows is only suitable for the pneumatic Evolute flush valve produced by Valsir  and will not fit other Valsir valves or other brands.


    The length of the bellows when compressed is around 68mm. When extended it is around 100mm,

    The outer diameter of the bellows on the hard plastic part is 43mm

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

  12. Geberit Flush valve for Concealed Tanks Sigma 8 and Sigma 75 ATS5200
  13. 2 inch Close Coupling Kit With Cranked Plate Ends ATS157

    This is what we call a 2" Close coupling kit  and it comes with a standard foam washer 15mm thick.The diameter of the hole in the plate  is 60mm. Unlike Ideal plates this version has the cranked ends so that it will work with cistern bottoms which are flat.

    NEED HELP ORDERING? CLICK HERE

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

15 Items results

per page
Set Descending Direction
Articles