Push Buttons

Showing 1-15 of 30 results

per page
Set Descending Direction
  1. Roca New Style Long Button Product code ATS073

    Roca dual flush new style replacement screw in style button pack. (Button housing depth is 75mm) This is the new style D2D long button pack that has screw in type pegs. 

    The Roca new style dual flush screw in long button. This button pack is the new D2D with the screw in pegs. It will not work with the older style push rod valves. 

    This button fits the Meridian, Georgia, Element, Happening, New Classical, Sydney, Frontalis & Veranda toilets providing they have the new D2D flushvalve. 

    Note: The body of these buttons is not round (see image from bottom of valve).

    To see a video of how to fit the button and valve click here. Button starts at 3 minute mark:

    Our part number is ATS073. 

    Roca part number 822044001

    Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.

    If you have any queries related to this purchase, please don’t hesitate to contact us.

    You can reach us by email info@toiletspares.com.au, phone or text (0415 614 847).

    If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.

    Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.

    If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

  2. Roca New Style Short  Button Product Code ATS072

    Roca  new style replacement screw in style button pack for dual flush toilets. 

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  3. Geberit Twico 1 Button Product Code ATS219

    This button fits the Geberit Twico 1 flush valve which is used in many Australian toilets including Caroma, Kohler and Villeroy and Boch.

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  4. Aimas Dual Flush Screwpeg Button  38mm  Product Code ATS248A

    Dual flush screwpeg button, is a generic button which can be cut down to the correct size. Available for standard 40mm cistern lid hole diameter

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  5. Geberit Twico 2 Button Product Code ATS064

    The genuine Geberit Twico 2 button product code ATS064 to go with the Twico 2 Geberit flush valve. 

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  6. Aimas Dual flush screwpeg button 48mm Product Code ATS248B

    50 mmDual flush screwpeg button, is a generic button which can be cut down to the correct size.

    INFORMATION ON POSTAGE CLICK HERE

    OUR RETURNS POLICY IS SECOND TO NONE

    NEED HELP ORDERING? CLICK HERE

    FOR MORE INFORMATION SEE DESCRIPTION BELOW

  7. Grohe Dual Flush Button Plate  ATS1327

    Backing plate for Grohe Button plates. Good for both ATS838A and ATS838B.

  8. Geberit  Dual Flush Button Plate for UP170 Concealed Cistern ATS5029

    This button plate is a genuine Geberit product for the UP170 concealed tank. This dual flush plate is manufactured to Geberit's usual high standards.

    For related products, see below.

  9. Geberit Back Plate For UP170 Cistern Button Plate ATS5030

    Backing plate for Geberit button plate for UP170 tank

  10. Bestter 38mm Dual Flush Toilet Push Button ATS7600

    Bestter round dual flush push button.  This high quality Bestter push button is a direct replacement for your current button. If the hole in the top of your cistern is between 39-45mm diameter, then this button will fit in it. Note, the distance between the centers of the acutator rods is 20mm. Rods end around 220mm below the cistern lid but can be cut down to any size shorter than that quite easily. 

Showing 1-15 of 30 results

per page
Set Descending Direction
Articles