New style Roca dual flush valve with screw in button pegs, product code ATS074. You can use this valve to upgrade from the old style push rod valve as it fits directly on the same cradle. You will however, also need the correct length new style button with screw in pegs. Product Code of buttons is either ATS072 (short) or ATS073 (long). We also have a very few of the sleeves that the pegs screw into Click Here They won't be replaced once they run out sadly. We also have a flush seal kit which also will not be replaced when they run out, click here
To see a video of how to fit the button and valve click here. Button starts at 3 minute mark:
Remember, when replacing the flush valve, it is a good idea to also replace the inlet valve. These items have a similar lifespan and you don't want to be doing this job twice. Have a look at our inlet valves, they are probably much cheaper than you expect.
(You can find our inlet valves here)
Also, for adjustment of your valve, have a look at our page explaining how they work. This will give a good idea of how to adjust them. Start with the single flush valves and then read about the dual flush valves.
Toilet manufacturers rarely make parts which look the same but are slightly different. Check the photos and dimensions and if it looks identical then it probably is.
If you have any queries related to this purchase, please don’t hesitate to contact us.
You can reach us by phone or text (0415 614 847). Outside of office hours you can email info@toiletspares.com.au,
If you can text or email photos of your existing parts, that will greatly increase the chances that we can help you.
Remember that if you order the wrong product that you can simply return it undamaged within 30 days for a full refund.
If the mistake is yours then of course, you will need to pay return postage. If the mistake is ours, we will naturally bear all postage costs.
IF YOU WANT A TRACKING NUMBER, THEN PLEASE ADD YOUR MOBILE NUMBER AT CHECKOUT TO RECEIVE IT VIA SMS.
Need Help with Ordering, Click Here